Home > News > Content
Product Categories

Watering Watering Can Watering Can No Water Pressure Is Going On?

Zhejiang Rain Garden Plastic Co.,Ltd | Updated: Nov 16, 2017

Sprinklers watering can watering pot kettle mouth watering can no water pressure may be blocked; or the tightness of the piston is not good, can not produce enough negative pressure. When the pressure is too large to use the needle to clean the water jet; when the pressure does not feel the pressure, the piston mechanism is broken, need to be replaced.

Steps are as follows:

1. Unscrew the nozzle and see if the hole in the middle is blocked. If the plug can be used fine iron wire.

2, the nozzle is broken, this situation can only be changed.

3, no tightening or broken bottle leak, resulting in insufficient air pressure. This can be screwed or blocked with glue.

Normal condition: add 2 /3 of water, tighten the top cover, hit the gas, press the water jet button (above the handle) to spray water.


I hope I can help you!

The watering pot fountain or may be blocked; the tightness of the piston is not good, can not produce enough negative pressure. [countermeasures] the pressure is too large to use the needle to clean the water jet; when the pressure does not feel the pressure, the piston mechanism is broken, need to be replaced. Hope to help.

p201706140902194314375.jpg

Services & Products
Resources, Geology & Exploration
Hydrogeology
Drilling
Geophysics
Environmental & geotechnical services
Hydrogeology
Contact Us
Tel:86-571-88532771
Fax: 86-571-88532772
Add:No.1103 Lianhemaitian
jianggan hangzhou zhejiang
Email:sales@rainsprayer.com
Feedback